Approved Combinations Of Cutting Tool, Deflector, Handle And Harness - Stihl FS-KM Manual De Instrucciones

Approved Combinations of Cutting Tool, Deflector, Handle
and Harness
Cutting tools
1 STIHL SuperCut 20-2
2 STIHL AutoCut 25-2
3 STIHL AutoCut C 25-2
4 STIHL TrimCut 30-2
5 STIHL PolyCut 20-3
6 STIHL FixCut 25-2
7 Grass cutting blade 230-4
8 Grass cutting blade 230-8
1)
9 Brush knife 250
10 Scratcher tooth circular
1)
saw blade 200
11 Chisel tooth circular
1)
saw blade 200
Grass cutting blades, brush knives,
shredder blades and circular saw blades
made of any other non-metal material
are not permitted.
Deflectors
12 Deflector for mowing heads only
13 Deflector with
14 Skirt and blade for all mowing heads
(see "Mounting the deflector")
15 Deflector without skirt and blade
for all metal mowing tools and brush
knife
16 Limit stop for circular saw blades
1)
Not approved for KM 55, KM 55 C,
KM 55 R, KM 55 RC, FS 55 T,
FS 55 TC, FS 55 RT, FS 55 RTC
FS-KM
Handles
17 Loop handle with
18 Barrier bar
19 Bike handle
Harnesses
20 Shoulder strap may be used
21 Shoulder strap must be used
22 Full harness may be used
23 Full harness must be used
Equipment
Among other parts, the complete FS-KM
CombiTool includes:
– Cutting tool
– Deflector
Select the correct combination from
the table according to the cutting tool
you intend to use. Read the table
horizontally from left to right. Other
combinations, e.g. reading the table
diagonally, are not permitted.
English / USA
Warning!
To reduce the risk of injury from
thrown objects and blade contact,
never operate your unit without the
proper deflector for the cutting
attachment being used. To reduce the
risk of injury from loss of control
and / or contact with the cutting tool,
make sure your unit is equipped with
a proper handle and harness for the
type of cutting attachment being
used.
Warning!
Plastic or metal cutting tools, but not
circular saw blades, may be used
only on power tools with a bike
handle or loop handle with barrier bar
in order to reduce the risk of personal
injury through contact with the
cutting tool. To reduce the risk of
serious injury to the operator or
bystanders by kickout, never use a
circular saw blade on a power tool
with a loop handle. Circular saw
blades may be used only on power
tools with a bike handle.
15