Stihl FS-KM Manual De Instrucciones página 8

Operating instructions
Do not cut any material other than grass,
brush and wood. The cutting tools may
be used only for the operations
described in your manual.
!
Warning!
Improper use of
any brushcutter
can cause serious
or fatal personal
injury. To reduce
the risk of personal injury to the operator
from blade contact and thrown objects,
make sure your unit is equipped with the
proper deflector, handle and harness for
the type of cutting attachment being
used. Conversely make sure any cutting
attachment you use is authorized for
your model in its current configuration.
(See chart in chapter on "Approved
Combinations of Cutting Tool, Deflector,
Handle and Harness").
Keep the deflector (and the skirt where
appropriate) adjusted properly at all
times (see chapter on mounting the
various cutting tools of your owner's
manual).
FS-KM
!
Warning!
Your power tool is a one-person
machine. Once started, it may fling
foreign objects for a great distance.
15m (50ft)
To reduce the risk of eye and other injury
insure that bystanders are at least
50 feet (15 m) away. Bystanders should
be encouraged to wear eye protection.
Stop the engine and cutting tool
immediately if you are approached. Start
and operate your brushcutter without
assistance. For specific starting
instructions, see the appropriate section
of the owner's manual of the
CombiEngine. Place the power tool on
firm ground or other solid surface in an
open area. Maintain a good balance and
secure footing.
English / USA
Starting
!
Warning!
To reduce the risk of injury from loss of
control, be absolutely sure that the
cutting tool is clear of you and all other
obstructions and objects, including the
ground, because when the engine starts
at starting-throttle, engine speed will be
fast enough for the clutch to engage and
turn the cutting tool.
With the engine running only at idle,
attach the power tool to the spring hook
of your harness (see appropriate
chapter of this manual).
Working Conditions
Operate and start your power tool only
outdoors in a ventilated area.
Operate the brushcutter under good
visibility and daylight conditions only.
Work carefully.
!
Warning!
Your brushcutter
produces toxic exhaust
fumes as soon as the
engine is running. These
gases (e.g. carbon
monoxide) may be
colorless and odorless. To reduce the
risk of serious or fatal injury from
inhaling toxic fumes, never run the
brushcutter indoors or in poorly
ventilated locations.
7