Declaration Of Conformity - Nice X-Bar Instrucciones Y Advertencias Para La Instalación Y El Uso

página de 160

/ 160
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

To be used only in the case of installations in conformity with chapter 1 and more specifically paragraph 1.3.1

To be detached, compile box N°1 and deliver to automation owner together with the operation manual and maintenance schedule

Declaration in accordance with the Directives: 2004/108/EC (EMC); 2006/42/CE (MD) Appendix II, part A;

Box N° 1

The installation of the product: X-Bar Road Barrier

Complete with pole: XBA4 and following accessories: ..........................................................................................................................................................

Was performed by:

Company: ................................................................................................. Address: ........................................................................................................

Name and Surname of responsible installer: ........................................................................................................................................................................

The installer hereby declares to have strictly observed all provisions of the instruction manual enclosed with the product:

Data ....................................................... Signature: ........................................................................

Place of product installation, at: .................................................................. Address: ........................................................................................................

Caution! – This declaration of conformity is not to be considered valid if all fields in this box are not duly compiled.

Note - The contents of this declaration correspond to those of in the official document, deposited at the registered offices of Nice S.p.a. and in particular to

the last revision available before printing of this manual. The text herein has been re-edited for editorial purposes.

A copy of the original declaration can be requested from Nice S.p.a. (TV) I.

Number: 294/X-BAR

Manufacturer's Name:

Address:

Person authorised to draw up

technical documentation:

Type:

Model:

Accessories:

The undersigned, Luigi Paro, in the role of Managing Director, declares under his sole responsibility, that the product specified above conforms to the provi-

sions of the following directives:

• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15th December 2004 regarding the approximation of member state legis-

lation related to electromagnetic compatibility, repealing directive 89/336/EEC, according to the following harmonised standards:

EN 61000-6-2:2005, EN 61000-6-3:2007

• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machinery, and amending directive 95/16/EC (recasting)

Should the machinery be put into service in a European country with an official language different from the one of this declaration, the importer must attach the translation of this

document to the declaration.

• Directive 89/106/EEC of the European Council of 21 December 1988 regarding the approximation of legislation, regulations and administration of Member

States concerning construction products, according to the following harmonised standards: EN 13241-1:2003

Characteristics

Release of hazardous substances

Resistance to wind load

Safe opening for vertically moving doors

Mechanical strength and stability

Manoeuvring forces for power-operated doors/gates

(*) CERT of Treviso Tecnologia in Lancenigo di Villorba (Tv)

The product also complies with the following standards:

EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008

The product complies, within the constraints of applicable parts, with the following standards:

EN 12445:2002, EN 12453:2002, EN 12978:2003, EN 60335-2-103:2003

Oderzo, 17 June 2010

16 – English