Product Description And Specifications; Technical Data; Noise/Vibration Information - Bosch PSM 10,8 LI Manual Original

OBJ_BUCH-1531-003.book Page 12 Wednesday, January 7, 2015 10:29 AM
12 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding and polishing of
wood, filler and coated surfaces. It is especially suitable for
profiles, corners or hard to reach locations.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Battery charge-control indicator / Overload indicator
2 On/Off switch
3 Battery pack *
4 Battery unlocking button *
5 Sanding sheet*
6 Sanding plate
7 Handle (insulated gripping surface)
8 Extraction outlet
9 Dust protection cap
10 Extraction adapter*
11 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless Multi Sander
Article number
Rated voltage
No-load speed
No-load orbital stroke rate
Sanding sheet surface
Orbit diameter
Weight according to
EPTA-Procedure 01/2003
Permitted ambient temperature
– during charging
*
– during operation and during
storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C
1 609 92A 0UE | (7.1.15)

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
a =5.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC including their amendments
PSM 10,8 LI
and complies with the following standards:
3 603 J76 9..
EN 60745-1, EN 60745-2-4.
V= 10.8
Technical file (2006/42/EC) at:
-1
min 11000
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
-1
min 22000
Henk Becker
2
cm 104
Executive Vice President
mm 1.2
Engineering
kg 0.7
°C 0 ... +45
Robert Bosch GmbH, Power Tools Division
°C –20 ... +50 70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 07.01.2015
PBA 10.8 V...
AL 11.. CV
Assembly
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools