Additional Operations - VWR Star-Beater Manual De Instrucciones

INSTRUCTION MANUAL

6.5. ADDITIONAL OPERATIONS

Checking the set time during operation
• If you want to check the set value for time during operation, push ENCODER knob,
so that TIME signal light shines. Then rotate ENCODER for one click right (+) or left
(-). TIME signal light flashes for 2 sec and display shows the set time value. After 2
sec, the real time value is shown on display again and TIME signal light stops
flashing.
Checking the set frequency during operation
• If you want to check the set value for frequency during operation, push ENCODER
knob, so that FREQUENCY signal light shines. Then rotate ENCODER for one click
right (+) or left (-). FREQUENCY signal light flashes for 2 sec and display shows the
set frequency value. After 2 sec, the real frequency value is shown on display again
and FREQUENCY signal light stops flashing.
EN 14
VWR Star-Beater