Functions
PREPARING THE FAST SLOW
COOKER™ FOR USE
1. Before first use, remove all promotional
labels and packing materials.
2. Remove the lid by taking hold of the handle,
turning it counter clockwise and lifting the
lid up and off the appliance.
3. Wash the removable cooking bowl, stainless
steel lid and silicone rubber gasket in hot,
soapy water, rinse and dry thoroughly. Wipe
the inside and the outside of the stainless
steel base with a soft, damp cloth, then dry
thoroughly.
4. Attach the clean silicone rubber gasket
securely back into the gasket holder
as illustrated. Ensure that the gasket is
installed correctly and the wire ring is fully
sitting inside the groove of the silicone seal.
12
2
1
WARNING
If the silicone rubber gasket is not fitted
correctly into the holder, the lid will not seal
properly. This may cause the appliance to
malfunction and leak steam or hot liquid which
can cause burn or scalding.
5. Clean and dry the bottom of the removable
cooking bowl as well as the temperature
sensor, making sure there are no
unwanted materials on the surface. The
removable cooking bowl must sit flat on
the temperature sensor to ensure proper
contact.