Wiring - Harbor Breeze 40093 Manual De Instrucciones

WIRING

WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12 gauges and there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
WARNING: If the house wires are different colors than referred to in the following step, stop
immediately. A professional electrician is recommended to determine the correct wiring scheme.
CAUTION: Be sure the outlet box is properly grounded or that a Ground (Green or Bare) wire is present.
1. Connect with supply and fan wires according to the
diagram and these steps:
• Connect the Green/Ground wire from the downrod
and the Green/Ground wire from the mounting
bracket (D) to the Bare/Ground supply wire.
• Connect the Red wire from the receiver (R) to the
supply Black wire.
• Connect the Black wire from the receiver (R) to the
Black wire from the fan.
• Connect the White wire from the receiver (R) to the
supply White wire.
• Connect the White wire from the receiver (R) to the
White wire from the fan.
• Connect the Blue wire from the receiver (R) to the
Blue wire from the fan.
• Secure all wiring connections together with wire
connectors (BB).
Note: The Red wire is hot power for the fan. The Blue
wire is hot power for the light kit. The White wire is
common for the fan and light kit. The Green wire
is the grounded wire. If house wires are different
colors than referred to above, stop immediately. It is
recommended a professional electrician determines
the proper wiring.
Haodwaoe Used
BB
Wire Connector
2. Wrap electrical tape (not included) around each
individual wire connector (BB) down to the wire.
Haodwaoe Used
BB
Wire Connector
1
Red
Receiver
2
x 5
x 5
13
Black
White
Ground/Green
Fan
Black
White
Blue
BB
Lowes.com/harborbreeze