Final Installation - Harbor Breeze 40093 Manual De Instrucciones

WIRING
3. Turn the spliced/taped wires upward and gently push
the wires and wire connectors (BB) into the outlet box.
WARNING: Ensure that no bare wire or wire
strands are visible after making connections. Place
the Green and White wire connections on opposite
sides of the outlet box from the Black and Blue (if
applicable) wire connections.

FINAL INSTALLATION

1. Remove the two mounting bracket screws (HH) from
the mounting bracket (D) and loosen the other two
screws about 1/4 in. Then align the canopy (C) up to
the ceiling over the loose mounting bracket screws
(HH). Place the keyholes of the canopy (C) into the
screws (HH) and rotate clockwise.
Haodwaoe Used
Mounting Bracket
HH
Screw
2. Secure the canopy (C) with the previously removed
mounting bracket screws (HH) and securely tighten
all four screws (HH).
Note:

Closemount installation will not have the
downrod (A) and canopy cover (M).
Haodwaoe Used
Mounting Bracket
HH
Screw
3
1
B
x 2
2
B
x 4
A
14
BB
Lowes.com/harborbreeze
HH
II
HH
J