Important; Fan Mounting - Harbor Breeze E-LUK52HBB5LEDR Manual De Instrucciones

INITIAL INSTALLATION
Secure mounting bracket (C) to outlet box (not
4.
included) using screws, spring washers, and flat
washers provided with the outlet box.
*NOTE: It is very important that you use the proper
hardware when installing the mounting bracket (C)
as this will support the fan.
IMPORTANT: If using the angle mount, make sure
open end of mounting bracket (C) is installed
facing the higher point of the ceiling.
5. Remove five screws and lock washers from
underside of motor in order to remove motor
stabilization plate. Motor stabilization plate may be
discarded.

FAN MOUNTING

1.
Remove pin (J) and clip (K) from motor housing
yoke at top of motor housing (E) and partially
loosen preassembled set screws.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 8 ft. (2.44 m) high or higher. For
taller ceilings you may want to use a longer
downrod (not included) than the one provided.
Angle style mounting is best suited for angled or
vaulted ceilings. A longer downrod is sometimes
necessary to ensure proper blade clearance.
4
2 5
2
motor
stabilization
plate
E
1
K
E
7
Set
Screw
Lowes.com/harborbreeze
C
J