Important; Final Installation - Harbor Breeze E-PEN44BCW5MC Manual De Instrucciones

WIRING
2. Wrap electrical tape around each individual
wire connector (EE) down to the wire as
shown in Fig. 2.
WARNING: Make sure no bare wire
or wire strands are visible after making
connections. Place green and white
connections on opposite side of box from the
black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently
push wires and wire connectors (EE) into
outlet box.
IMPORTANT: Using a full range dimmer
switch to control fan speed will cause a loud
humming noise from fan. To reduce the risk
of fire or electric shock, do NOT use a full
range dimmer switch to control fan speed.
(Fig. 3)

FINAL INSTALLATION

1. Lift canopy (B) to mounting bracket (C), aligning
slotted holes in canopy (B) with loosened canopy
mounting screws (FF) in mounting bracket (C). Twist
canopy (B) to lock. Re-insert the two screws (FF) that
were removed in Step 4 on page 7 and tighten all
screws (FF) securely. (Fig. 1)
All manuals and user guides at all-guides.com
12
Hardware Used
E 3 Wire Connector
EE
Fig. 3
Dimmer
Switch
For illustrative purposes only--not
intended to cover all types of controls
Fig. 1
FF
Hardware Used
FF
Canopy Mounting Screw
Fig. 2
EE
EE
EE
x 4
3
2
1
Speed
Switch
FF
B
A
x 4