Safety Standards; General Features; Environment; Operating Environmental Conditions - Amprobe GP-2A Manual De Uso

Interfering voltage measurement
Reading [V]
0 ÷ 460

9.2.1 Safety standards

Instrument's safety: IEC / EN61010-1, IEC / EN61557-1, IEC / EN61557-5
Technical literature: IEC / EN61187
Measuring accessories' safety: IEC / EN61010-031
Insulation:
Type of Protection: IP50 according IEC / EN60529
Pollution level:
Over voltage category:
Ambient conditions:
maximum altitude:
Installations characterized by Safety Voltage 25V

9.2.2 General features

Mechanical features
Dimensions: 235(L) x 165(W) x 75(H) mm
Weight (including batteries): approx. 1000g
Power supply
Battery type: 6 batteries 1.5V AA R6 MN1500 or
6 Batteries 1.2V AA R6 Ni-MH 2100mA rechargeable batteries
Low battery indication: low battery symbol
is too low
Battery life: approx. 500 tests
Auto power off: the instrument automatically switches off three minutes after last
measurement, selection or PC command
Display
Features: LCD custom with back-light 73x65 mm
Memory
Features: 999 memory locations
PC connection
Features: optoinsulated port for bi-directional communication

9.3 Environment

9.3.1 operating environmental conditions

Reference calibration temperature: 23 ± 5°C
Working temperature: 0 ÷ 40°C
Maximum relative humidity: <80%
Storage temperature: -10 ÷ 60°C
Storage humidity: <80%

9.3.2 EMC

This instrument was designed in compliance with the EMS standards in force and its
compatibility was tested relatively to EN61326-1.
This instrument complies with the requirements of the European Low Voltage Directive
2006/95/CE (LVD) and EMC Directive 2004/108/CE
Range (**)
Measure [V]
7 ÷ 460
Class 2, Double insulation
2
CAT III 240V (to earth), maximum 415V between inputs
2000m
Resolution [V]
1
is displayed when voltage supplied by batteries
23
Uncertainty (*)
± (2.0% read.+2digit)