Management Of Stored Data; How To Save A Measurement; How To Cancel One Or Several Measurements - Amprobe GP-2A Manual De Uso

5. MANAGEMENT oF SToRED DATA

5.1 How To Save A Measurement

After taking a measurement press SAVE key, the instrument displays a screen
1.
similar to the one below
2. Should you need to modify the values of the parameters L and P press the arrow
keys , and select L or P, then pressing the arrow keys , set the desired
value (from 1 to 255). These values can enable you to trace back the place where
the measurement was effected
3. or

5.2 How To Cancel one or Several Measurements

Press RCL key, the instrument displays a screen similar to the one below
1.
2. Press the arrow keys , to select the memory location where cancellation of
data is to be started , the displays a screen similar to the one below
�CAUTION
Confirming cancellation of data causes removal of all stored data starting from the selected
location till the last memory location
Confirm measurement storing pressing SAVE key or ENTER key
(No. of memory location where the
measurement has to be saved)
(Last value set for parameters L and P)
(Number of the last memory location used)
(Values of L and P parameters)
(Number of the memory location where
cancellation is to be started)
(Values of L and P parameters)
17