Look E-POST 2 EVO Manuales Del Usuario página 21

Notes :
• When a saddle is already installed
on the bicycle, you cannot use a torque
wrench. However, it is still possible to
tighten/loosen the seatpost. To do this,
use a 4mm hex or Allen key by inserting
it into the opening of the screw head.
Tighten moderately so as to not exceed
4Nm.
• To remove your seatpost, loosen the
screw as needed. THE E-POST 2 EVO
should easily come free. If it does not,
loosen the screw some more.
MOUNTING A SHIMANO BATTERY
The E-POST 2 EVO has an integrated
mounting system for the Shimano batteries
SM-BTR2 or BT-DN110.
To mount your battery, secure it to the battery
support (6).
EN
Fig 11
Fig 12
21