Elimination Of Faults; Disposal Of Appliance; Warranty - Brill RazorCut Premium 33 Instrucciones De Uso

Elimination of faults

Fault
Abnormal noises,
lawnmower rattles
Lawn turning yellow,
cut not clean
The appliance leaves deep
tracks

Disposal of appliance

This symbol on the product, operating instruc-
tions or packaging indicates that this product, at
the end of its service life, may not be disposed of
as normal household waste.
It must be disposed of at a collection point for the
recycling of electric and electronic appliances.
Materials are to be recycled according to their
classification. Through the correct disposal of the
used appliance, recycling of materials and other
forms of recycling, you are making a valuable
contribution towards the protection of our envi-
ronment.
Please ask your local authorities for a list of
appropriate recycling points.
20
Possible Cause
Screws on the cutting equip-
ment or mower housing are
loose
Blade is too blunt
Cutting height too low
Cutting gap between blade
roller and lower blade is too
large
Ground softened by water,
lawn too wet

Warranty

The manufacturer warrants its products for
exclusively non-commercial use for a period of
24 months from the date of original purchase.
This warranty does not affect statutory warranty
claims. The warranty covers all substantial faults
of the product, which are caused by defects in
material and workmanship. If a product exhibits
such a defect we will, at our option, repair or
replace it without cost for parts and labour pro-
vided the following requirements are fulfilled:
– The product must have been sold to the cus-
tomer in a legally correct way.
– The original receipt with the customer's
address, date of purchase, model and product
designation is presented as proof of purchase.
– The product must have been purchased within
the EC.
– The product was handled properly and accord-
ing to the recommendations in the operating
instructions.
Remedy
Tighten bolts
Change blade
Use a slightly higher cutting
heigh
Readjust cutting gap with thick-
ness gauge
Allow lawn to dry, do not mow if
grass is wet