Inserting Printing Cartridge; Selecting Language - Reiner jetStamp 790 Instrucciones De Empleo Breves

jetStamp 790/790 MP
jetStamp 792/792 MP

1.4. Inserting Printing Cartridge

When using special ink (MP), observe the notes in the operating instructions .
CAUTION
Health risks if ink is swallowed.
Don't swallow!
f
Keep cartridge out of the reach of children!
f
Inserting Printing Cartridge
Remove the jetStamp 790/792 from the charging station
f
Press [MODE] until [INKJET] appears in the display menu bar.
f
Press [INKJET].
f
The print carriage moves into a central position.
Push the locking rail
f
Take the new cartridge
f
from nozzles
When using standard ink hold the small felt pad
f
14
nozzles until some ink appears on the felt.
Holding the cartridge handle
f
Pull the locking rail
f
Press [INKJET].
f
The print carriage moves to the stamping position.

1.5. Selecting language

Proceed as in menu access (see page 17)
Press [NEXT] until "LANGUAGE" appears.
f
To adjust the language setting, press [VARY].
f
To increase the number value, press [INC].
f
To decrease the number value, press [DEC].
f
0 = German
1 = French
2 = English
3 = Italian
4 = Spanish
To move directly to the next menu item,
f
press [RETURN] once.
– OR –
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
23
Fig.

10
as far back as it will go.
13
from its packaging and remove the protective film
14
or clip.
9
, insert the cartridge
10
forward again until it locks into place.
A + C + E
4
15
that is provided, against the cartridge
13
into the print carriage.
5 = Portuguese
6 = Flemish
7 = Norwegian
8 = Swedish
9 = Danish
.
16