Technical Data; Noise Emission Specifications - Mafell DSS 300 cc Traducción Del Manual De Instrucciones Original

2.3 Technical data

Cutting width
Cutting speed at normal load
Swivel range
Wire set can be tilted back by 45°
Cutting depth
at 0°
at 15°
at 30°
at 45°
at 60°
Machine dimensions
Width x length x height
Base plate
Width without limit stop
Weight without power cord and supplementary
support plate
Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Idling speed
Change of drive wheel

2.4 Noise emission specifications

The noise emission values were determined according to EN 62841-2-1 with the following deviation: The
workpiece used was a fibreboard with a thickness of 140 mm and a density of 180 kg/m³ The emission values
amount to:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
Idling
Normal load
L = 90 dB (A)
PA
K = 3 dB (A)
PA
L = 101 dB (A)
WA
K = 3 dB (A)
WA
-20-
230 V~, 50 Hz
1800 W
8.0 A
28500 rpm
4700 rpm
4600 rpm
6.0 mm (0.236 in.)
45.7 m/s
60°
306 mm (12.047 in.)
291 mm (11.456 in.)
257 mm (10.118 in.)
206 mm (8.110 in.)
142 mm (5.590 in.)
390 x 524 x 753 mm
(15.354 x 20.629 x
29.645 in.)
406 x 329 mm (15.984
x 12.952 in.)
300 mm (11.811 in.)
8.25 kg (18.18 lbs)
110 V~, 50 Hz
1500 W
14.0 A