18
CLE ANING FUNCTION
en
PROCEDURE
Although the antimineral pad absorbs most of the lime
in the water, the heating plate of the BONECO S250 ex
periences calcification after an extended operating time.
An upcoming need for cleaning is indicated on the display
by the
symbol.
To make descaling easy and convenient, the BONECO
S250 is equipped with an automatic cleaning function.
This warms and cools the heating plate multiple times in
order that the lime becomes crumbly and can be easily
removed.
STARTING THE CLEANING
1.
Switch off the BONECO S250 and let it cool down for
1 hour.
2. Remove the antimineral pad and empty the water
tank.
3. Mix 1 bag CalcOff
with 1 liter (about 1 quart) of
®
warm tap water.
4. Add the mixture to the BONECO S250.
5. Press the
button for 3 seconds to start the clean
ing.
6. Select the duration of cleaning you want (1 to 9 hours)
using the
and
buttons. If stubborn mineral de
posits are left after cleaning, you can always extend
or repeat the cleaning process.
7.
Unplug the BONECO S250 and rinse the water tank
with tap water.
8. Place the antimineral pad back into the water tank.