DAB PUMPS ALM 200 Instrucciones Para La Instalación Y El Mantenimiento página 16

CONTENTS
1. GENERAL
2. PUMPED FLUIDS
3. TECHNICAL DATA AND RANGE OF USE
4. MANAGEMENT
4.1 Storage
4.2 Transport
4.3 Weights
5. WARNINGS
5.1 Checking motor shaft rotation
5.2 New systems
5.3 Protections
5.3.1
Moving parts
5.3.2 Noise level
5.3.3 Hot and cold parts
6. INSTALLATION
7. ELECTRICAL CONNECTION
8. STARTING UP
9. PRECAUTIONS
10. MAINTENANCE AND CLEANING
11. MODIFICATIONS AND SPARE PARTS
12. TROUBLESHOOTING
1. GENERAL
The pump may be installed in either horizontal or vertical position, as long as the motor is always above the
pump.
For ALM 200 and ALP 800 circulators, installation must be carried out ONLY in horizontal position.
2. PUMPED FLUIDS
The machine has been designed and built for pumping water, free from explosive substances and solid
particles or fibres, with a density of 1000 kg/m³ and a kinematic viscosity of 1 mm²/s, and chemically non-
aggressive liquids. Use with other fluids is allowed only with the manufacturer's authorization.
3. TECHNICAL DATA AND RANGE OF USE
− Supply voltage
− Head up - Hmax (m):
− Maximum working pressure 10 Bar ( 1000 Kpa ):
ALM(E) , ALP(E), KLM(E), KLP(E), DKLM(E), DKLP(E)
− Maximum working pressure 16 Bar (1600 Kpa ):
CM 40/440, CM 40/540, CM 40/670, CM 40/870, CM 50/510, CM 50/630, CM 50/780, CM 50/1000, CP 40/1900, CP 40/2300, CP
40/2700, CP 40/3500, CP 50/2200, CP 50/2600, CP 50/3100, CP 50/4100, CME 40/870, CME 50/1000, CPE 40/2300, CPE
40/3500, CPE 50/2600, CPE 50/4100
− Maximum working pressure 10 Bar (1000 Kpa ):
CM 40/1300, CM 40/1450, CM 50/1270, CM 50/1420, CP 40/3800, CP 40/4700, CP 40/5500, CP 40/6200, CP 50/4600, CP
50/5100, CP 50/5650, CME 40/1450, CME 50/1420, CPE 40/4700, CPE 40/5500, CPE 40/6200, CPE 50/4600, CPE 50/5650,
DCM 40/380, DCM 40/460, DCM 40/620, DCM 50/460,DCM 50/630, DCM 50/880, DCM 65/670, DCM 65/820, DCM 65/900,
DCM 80/630, DCM 80/730, DCM 80/860,DCM 80/1020, DCM 100/820, DCM 100/1000, DCM 100/1200, DCM 100/1450, DCP
40/1250, DCP 40/1650, DCP 40/2050, DCP 40/2450, DCP 50/1550, DCP 50/1900, DCP 50/2450, DCP 50/3000, DCP 50/3650,
DCP 65/2300, DCP 65/2650, DCP 65/3250, DCP 65/3700, DCP 80/2530, DCP 80/3050, DCP 80/3650, DCP 80/4100, DCP
100/2450, DCP 100/2750, DCP 100/2800, DCP 100/2900, DCP 100/3300, DCP 100/3750, DCME 40/620, DCME 50/460, DCME
50/880, DCME 65/670, DCME 65/900, DCME 80/730, DCME 80/1020, DCME 100/1000, DCME 100/1200, DCME 100/1450,
DCPE 40/1650, DCPE 40/2450, DCPE 50/1550, DCPE 50/2450, DCPE 50/3650, DCPE 65/2300, DCPE 65/2650, DCPE
65/3250, DCPE 65/3700, DCPE 80/2530, DCPE 80/3050, DCPE 80/3650, DCPE 80/4100, DCPE 100/2450, DCPE 100/2750,
DCPE 100/2900, DCPE 100/3300, DCPE 100/3750
− Standard apertures
ENGLISH
- 1 x 220-240 V 50 Hz
- 1 x 110V 50 Hz
- 1 x 115V 60 Hz
- 3 x 230-400 V 50/60 Hz up to 4 KW inclusive
- 3 x 400V 50/60 Hz over 4 KW
pag. 98
14
page
14
14
14
15
15
15
15
15
15
15
16
16
16
16
16
16
17
17
17
18
18
See electric
data plate