Monitor - Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento

Monitor

The 'monitor' tab lets you toggle the monitor options as well as Display 3D LUT and Scopes.
These can be toggled on or off for the LCD display and SDI monitor out.
Tap on LCD or SDI to toggle the options on or off
Monitor Settings – LCD tab and Monitor SDI tab
Display options can be toggled on or off for the LCD screen and SDI output feed individually
using the LCD or Monitor SDI tab.
These include:
Clean Feed
Turn clean feed 'on' to disable all status text and overlays for the LCD display and
monitor SDI output. This option is a quick way to turn off all the outputs at once.
Zebra
Tap the 'zebra' setting on to enable zebra guides. When your zebra guides are on,
diagonal lines with appear to let you know what areas may be clipped. See the
'touchscreen menu' in this manual for information on how to set the zebra guide levels.
Focus Assist
Toggle on 'focus assist' on the LCD or monitor SDI output to view the focus assist
overlay lines. Focus assist type and color settings can be in the 'LCD and SDI' menu.
Guides
To see frame guide overlays for different film, television and online aspect ratios, toggle
on frame guides. Choose your desired guide from the front panel display by tapping on
the 'monitor overlays' icon.
Grid
To see one of three grid options to assist with framing, toggle 'grid' on. Grid options
include thirds, center dot and crosshair. Toggle grid on or off. To set the desired grid,
tap on the menu icon in the top right corner to return to the LCD display and tap on the
'monitor overlays' option.
False Color
The 'false color' setting toggles the appearance of false color exposure assistance on
the LCD touchscreen. For more information, see the 'false color' section in the
'touchscreen menu' in this manual.
Settings 30