Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento página 604

Command
goto: timeline: {start/end}
goto: timeline: {n}
goto: timeline: +{n}
goto: timeline: -{n}
goto: timecode: {timecode}
goto: timecode: +{timecode}
goto: timecode: -{timecode}
goto: slot id: {n}
jog: timecode: {timecode}
jog: timecode: +{timecode}
jog: timecode: -{timecode}
shuttle: speed: {-5000 to 5000}
remote
remote: enable: {true/false}
remote: override: {true/false}
configuration
configuration: video input: optical
configuration: video input:
{SDI/HDMI/component/composite}
configuration: audio input:
{embedded/XLR/RCA}
configuration: file format: {format}
configuration: timecode input:
{external/embedded/preset/clip}
configuration: timecode preset:
{timecode}
configuration: audio input channels: {n}
configuration: record trigger:
{none/recordbit/timecoderun}
configuration: record prefix: {name}
configuration: append timestamp:
{true/false}
uptime
format: slot id: {n} prepare:
{exFAT/HFS+} name: {name}
format: confirm: {token}
identify: enable: {true/false}
watchdog: period: {period in seconds}
Command Description
goto start or end of timeline
goto frame position {n} within timeline
go forward {n} frames within timeline
go backward {n} frames within timeline
goto specified timecode
go forward {timecode} duration
go backward {timecode} duration
goto slot id {n} equivalent to "slot select: slot id: {n}"
jog to timecode
jog forward {timecode} duration
jog backward {timecode} duration
shuttle with speed
query unit remote control state
enable or disable remote control
session override remote control
query configuration settings
switch to optical input
change the video input
change the audio input
switch to specific file format
change the timecode input
set the timecode preset
set the number of audio channels recorded to {n}
change the record trigger
set the record prefix name (supports UTF-8 name)
append timestamp to recorded filename
return time since last boot
prepare formatting operation filesystem type with
volume name {name}
"slot id" can be omitted for the current mounted slot
"name" defaults to current volume name if mounted (supports
UTF-8)
perform a pre-prepared formatting operation using token
identify the device
client connection timeout
Developer Information
604