Transferencia De Archivos; Información Para Desarrolladores; Blackmagic Hyperdeck Ethernet Protocol - Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento

Transferencia de archivos

Una vez conectado el grabador, es posible transferir archivos mediante el cliente FTP. Muchos
programas de este tipo cuentan con una interfaz que permite arrastrar y soltar elementos. Verifique
el método de transferencia que la aplicación utiliza.
Aunque es posible transferir cualquier tipo de archivos al grabador, nótese que aquellos que vayan
a reproducirse desde el dispositivo deben ser compatibles con los códecs y las resoluciones que
este admite. Consulte la lista de códecs compatibles en el apartado correspondiente.
SUGERENCIA: Es posible transferir archivos mientras la unidad está grabando. El
dispositivo ajustará automáticamente la velocidad de transferencia para que la grabación
no se vea afectada.
Información para desarrolladores

Blackmagic HyperDeck Ethernet Protocol

Version 1.10
The Blackmagic HyperDeck Ethernet Protocol is a text based protocol accessed by connecting to
TCP port 9993 on HyperDeck Extreme 8K HDR. If you are a software developer you can use the
protocol to construct devices that integrate with our products. Here at Blackmagic Design our
approach is to open up our protocols and we eagerly look forward to seeing what you come up with!
You can connect to your HyperDeck recorder using the HyperDeck Ethernet Protocol using a
command line program on your computer, such as Terminal on a Mac and putty on a
Windows computer.
The HyperDeck Ethernet Protocol lets you schedule playlists and recordings. The following is an
example of how to For example, to play 7 clips from clip number 5 onwards via the HyperDeck
Ethernet Protocol. If your recorder is installed out of reach, you can also turn on the 'remote' feature
via ethernet.
On a Mac
1 Open the Terminal application which is located with the applications > utilities folder.
2 Type in "nc" and a space followed by the IP address of your HyperDeck Extreme 8K
HDR another space and "9993" which is the HyperDeck Ethernet Protocol port number.
For example type: nc 192.168.1.154 9993. The Protocol preamble will appear.
3 Type "playrange set: clip id: 5 count: 7" and press 'return'.
If you look on the timeline on the front panel of the HyperDeck Extreme 8K HDR, you will
see in and out points marked around clips 5 through the end of clip 11.
4 Type "play". Clips 5 through 11 will now play back.
5 To clear the playrange, type "playrange clear"
6 To exit from the protocol, type 'quit'.
Información para desarrolladores 425