The Frame; The Wheels - Mutsy NEXO Manual De Instrucciones

The frame

Unfold the frame (a, b)
· Keep children away from all moving parts when unfolding.
· Press the unfolding safeguard inwards (a1) and lift the upper frame up
until the lower support clicks into place. Move the push-bar backwards
until you hear a second click. (b)
· Before use always check that the pram has been unfolded and secured
correctly.
Fold the frame (c,d)
· Stand behind the frame and put the frame on the brake. Put the
height adjustment buttons (c1) of the push bar in the lowest position.
Pull the release buttons of the upper frame (c2) towards you on both
sides and turn the push bar forwards until the push bar is on the lower
support. (c3)
· Pinch the lower frame unlocking buttons and fold the frame. (d)
· The folding safeguard locks automatically when the product is folded up.
· You can carry the frame from the push bar when the unfolding safe-
guard has been locked.

The wheels

Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the rear wheel casing until you hear a
click.
· Pull the wheel to check that it has been attached firmly.
Disassemble the rear wheels (f)
· Press the button at the back side of the rear wheel casing and take the
wheel off the frame
Assemble the front wheels (g)
· Slide the axle of the front wheel upwards in the front wheel casing until
you hear a click.
· Pull the wheel to check that it has been attached firmly.
Disassemble the front wheels (g)
· Push the button on the back side of the front wheel (g1) and pull the
wheel from the front wheel casing. (g2)
The swivelling wheels (h)
· Turn the ring above the front wheel outwards on both sides in order to
block the swivel setting. The swivelling wheels will automatically be
EN
7