Description Of Symbols - Silverline 329863 Manual Del Usuario

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Caution!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Toxic fumes or gases!
Warning: Sharp blades or teeth!
WARNING: Moving parts can cause crush and cut injuries
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
6
Original Instructions
Technical Abbreviations Key
V Volts , DC
~, AC Alternating current W, kW
A, mA /min or min
Ampere, milli-Amp
n No load speed rpm
0
° Degrees dB(A)
Ø
Diameter
m/s
2
Hz Hertz
Specification
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230-240V~ 50Hz
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1020W
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11,500-34,000min
Max cutting depth:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36mm
Max router cutter diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø32mm
Plunge stroke:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-40mm
Turret stop: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 position with adjustable heights
Max Collet size:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mm
Base shape:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Combined circular & flat
Guide Bush: . . . . . . . . . . . . . . . . . . . . . . . . Ø16mm (internal), Ø18mm (external)
Dust extraction connector:. . . . . . . . . . . . . . Ø34mm (internal), Ø40mm (external)
Duty Cycle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S1 (continuous operation)
Ingress protection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IP20
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cord length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5m
Dimensions (L x W x H):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 x 110 x 250mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92dB(A)
PA
Sound power L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3dB(A)
Weighted vibration a :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.59m/s
h
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and provides the correct level of
sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary, limit
the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with
hands below a normal comfortable temperature, as vibration will have a greater effect. Use the
figures provided in the specification relating to vibration to calculate the duration and frequency
of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar
international standards. The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise
and vibration. www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time.
Direct current
Watt, kilowatt
Operations per minute
-1
Revolutions per minute
Decibel sound level (A weighted)
Metres per second squared
(vibration magnitude)
-1
2
2