Look R96 Manual De Montaje página 14

seat Post
Fig. 2
1
2
3
4
5
6
1. Upper carriage
2. Spherical washer
3. Tightening bolt
4. Grooved pin
5. M5 x 60 bolt
6. Barrel
7. Spherical head nut
7
8
9
10
11
12
13
8. Lower carriage
9. Eye screw
10. Saddle rod head
11. Spacer
12. Seat tube cover
13. Seat tube
FittinG tHe
seat Post Head
1. Place the cover (12) on the seat tube.
2. Stack the spacers (11) on the cover with
care to stacking direction:
3. Insert the barrels (6) into the holes of the
seat tube designed for that purpose.
4. Position the seat post head (10) on the
spacers.
5. Apply a LOCTITE 243 type product to the
threads of the two M5 x 60 screws (5).
6. Insert these screws into the head and
then screw them into the barrels in
place. Alternatively tighten the screw in
front and the one behind until a torque
of 8 Nm is reached.
EN
Arrows to the front
of the bicycle
15