Charging Procedure - Worx Trans4Mer WX540 Manual Del Usuario

SYmBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water
10
Do not burn
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
be discarded with household waste
but that it shall be returned to a
collection system which conforms to
the European Directive 2002/96/CE.
It will then be recycled or dismantled
in order to reduce the impact on the
environment. Electric and electronic
equipment can be hazardous for
the environment and for human
health since they contain hazardous
substances.
12V Li-ion multi-purposed saw
OpERATiNg iNSTRUCTiONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is 2 saws in 1 tool with rep saw
and jig saw function, intended for sawing
wood, plastic, metal and building materials
while resting firmly on the workpiece. It is
suitable for straight and curved cuts.

CHARgiNg pROCEDURE

1. CHaRGING yOUR baTTERy PaCK
waRNING!
The charger and battery pack are
specifically designed to work together so do
not attempt to use any other devices. Never
insert or allow metallic objects into your
charger or battery pack connections because
an electrical failure and hazard will occur.
2. bEFORE USING yOUR CORDLESS
TOOL
Your battery pack is UNCHARGED and you
must charge once before use. When you
charge the new battery or one which has not
been used for long periods of time, it may
not reach full charge until after you have
discharged it fully in use and recharged it
several times.
3.1. HOw TO CHaRGE yOUR baTTERy
PaCK (wX540 wX540.9) (See Fig. a1)
Connect the battery charger (13) to the power
supply and the green light (14) will illuminate.
Slide the battery pack (12) into the charger
base to make the connections. And the red
light (14) will illuminate to show charging has
started.
After charging approx 3-5hours, the red light
will switch to green, which means the battery
is full, and charging is completed.
3.2. CHaRGING PROCEDURE (wX540.3)
(See Fig. a2)
1) Plug the charger into an appropriate outlet.
The light (a) will be green.
2) Insert the battery pack into the charger, the
EN