Troubleshooting Guide - Brita Redi-Twist USS-334 Instrucciones De Instalación

Leaks between system
head assembly and
Redi-Twist™ filter
* Remove the Redi-Twist™ filter and inspect the
o-rings. Make sure they are in place and free
from dirt and particles.
* Install the Redi-Twist™ filter.
* Turn on the cold water supply valve and
turn on the filter faucet.
* Make sure Redi-Twist™ filter is fully into the
lock position.
Leaks around
auxiliary faucet
* Turn off the cold water shut-off valve.
* Check for leaks around the compression fitting.
If leaking, check to make sure connections are
all secure.
* If leaking continues, disconnect the 1/4"
plastic tubing and try wrapping the ferrule with
plumbers tape and tighten compression nut.
Leaks around
Kitchen Faucet
connection
* Turn off the cold water shut-off valve to the
filter system.
* Locate the compression cap covering the spray
hose connector stem.
- Make sure the cap is seated correctly
and securely.
- If leaking continues, try using plumbers
tape or check to see if another size of
cap works better.
USS-334 installation instructions
Need Help? 1-866-709-2086
Be sure to turn off the cold water supply until leak issue is resolved.
connect to auxiliary faucet
Troubleshooting
Guide
* Turn off the cold water shut-off valve. Press
in the gray collar on the Inlet and/or Outlet
fittings. Remove tube and inspect. Repair/
replace tubing. Reconnect tubing. Ensure it
hasn't been crimped.
* Turn the cold water shut-off valve back on and
turn on the faucet for filtered water.
Leaks on Auxiliary
Faucet Adapter
connection
* Turn off the cold water shut-off valve to the
filter system.
* Locate the kitchen faucet adapter.
- If the plastic tubing is leaking,
follow the previous steps in "Leaks
around fittings" section.
- If the thread between the kitchen
faucet adapter and the kitchen
faucet stem is leaking, tighten more
securely. If leaking continues,
disconnect the plastic tubing and
remove the kitchen faucet adapter.
Wrap the kitchen faucet adapter and
the cold water supply line with
plumber's tape and re-install.
- Turn the cold water shut-off valve back
on and turn on the faucet for filtered water.
Leaks around fittings
Version 2.0C
11