Troubleshooting Guide - Brita Redi-Twist Instrucciones De Instalación

auxiliary faucet installation
Troubleshooting
Guide
Leaks between system
head assembly and
Redi-Twist™ filter
* Remove the Redi-Twist™ filter and inspect the
o-rings. Make sure they are in place and free
from dirt and particles.
* Install the Redi-Twist™ filter.
* Turn on the cold water supply valve and
turn on the filter faucet.
* Make sure Redi-Twist™ filter is fully into the
lock position.
Leaks around
auxiliary faucet
* Turn off the cold water shut-off valve.
* Check for leaks around the compression fitting.
If leaking, check to make sure connections are
all secure.
* If leaking continues, disconnect the 3/8"
plastic tubing and try wrapping the ferrule with
plumbers tape and tighten compression nut.
Leaks around
Kitchen Faucet
connection
* Turn off the cold water shut-off valve to the
filter system.
* Locate the compression cap covering the spray
hose connector stem.
- Make sure the cap is seated correctly
and securely.
- If leaking continues, try using plumbers
tape or check to see if another size of
cap works better.
Auxiliary Faucet Installation Instructions
Need Help? 1-866-709-2086
Be sure to turn off the cold water supply until leak issue is resolved.
* Turn off the cold water shut-off valve. Press
in the gray collar on the Inlet and/or Outlet
fittings. Remove tube and inspect. Repair/
replace tubing. Reconnect tubing. Ensure it
hasn't been crimped.
* Turn the cold water shut-off valve back on and
turn on the faucet for filtered water.
Leaks on Auxiliary
Faucet Adapter
connection
* Turn off the cold water shut-off valve to the
filter system.
* Locate the kitchen faucet adapter.
- If the 3/8" plastic tubing is leaking,
follow the previous steps in "Leaks
around fittings" section.
- If the thread between the kitchen
faucet adapter and the kitchen
faucet stem is leaking, tighten more
securely. If leaking continues,
disconnect the 3/8" plastic tubing and
remove the kitchen faucet adapter.
Wrap the kitchen faucet adapter and
the cold water supply
line with plumber's tape and re-install.
- Turn the cold water shut-off valve back
on and turn on the faucet for filtered
water.
Leaks around fittings
Version 1.0D
11 11