Troubleshooting - Brita FF-100 Guia Del Usuario

TROUBLESHOOTING

You are unable to attach
the system to your faucet.
Adapters provided do not
fit your faucet.
Water leaks or sprays
from connection at
faucet.
Water leaks or sprays
from the system itself.
Flow rate of filtered water
slows.
Filter Replacement
Indicator does not reset
with new cartridge
insertion.
Filter Replacement
Indicator does not
illuminate.
FOR PURCHASES MADE IN IOWA: This form must be signed and dated by the buyer and seller prior to the consummation of
this sale. This form should be retained on file by the seller for a minimum of two years.
BUYER:
Name
Address
Signature
Date
See Step 2 of Installation in Five Easy Steps to determine if you need to
use an adapter. Check to see that you have correctly inserted the
proper adapter and washer.
Call Brita Consumer Services at 1-800-24-BRITA (U.S.) or
1-800-387-6940 (Canada).
Check to see that you placed the washer between the faucet and the
adapter. Check to see that the mounting collar is tight and the
threading is aligned with the faucet or adapter threading. Only water
from filter port is filtered. All other water is unfiltered.
Make sure the filter cartridge is locked into place. Water leaking or
spraying from system may not be filtered. Only water from filter port
is filtered. All other water is unfiltered.
Remove the system from the faucet and clean the sediment from the
strainer in the mounting collar. If flow rate of filtered water remains
slow, replace filter cartridge. Although Brita® Faucet Replacement
Filters have an extra layer to reduce sediment buildup, very high
sediment in your water may cause the system to prematurely clog
before the typical end of filter life. The clogging means that your Brita®
Faucet Replacement Filter is removing the sediment from your tap
water. See directions for Early filter replacement and manual reset of
the Filter Replacement Indicator on page 5.
Make sure the filter cartridge is locked into place. If you replaced the
cartridge before the indicator light flashed red, you need to manually
reset the Filter Replacement Indicator. See directions for Early filter
replacement and manual reset of the filter replacement indicator on
page 5.
Call Brita Consumer Services at 1-800-24-BRITA (U.S.) or
1-800-387-6940 (Canada).
SELLER:
Name
Address
Telephone Number
Signature
Date
6