Operation; Maintenance And Care; Disassembly And Repair - Festo DDPC Instrucciones De Utilizacion

DDPC
7

Operation

Warning
Injury to people and damage to property.
Fast moving parts can cause injury to people in the
vicinity of the DDPC.
• Make sure that nobody can place his/her hand
in the positioning range of the effective load
(e. g. by means of a protective guard). If the
DDPC is protected correctly, it should not be
possible to gain access to it until it has come to
a complete stand.
• Make sure no objects project into the
positioning range of the effective load.
8

Maintenance and care

• Do not modify the settings of screws and threaded pins if there is no request to do so in these
instructions.
In this way you will prevent damage to the cylinder at a later stage.
Cleaning:
• Clean the outside of the DDPC with a soft cloth.
The following cleaning agents are permitted:
– Soap suds (max. +60 °C)
– Petroleum ether
– Any gentle detergent.
9

Disassembly and repair

On disassembly:
Warning
Injury to people and damage to property.
There is a danger of injury caused by pressure
forces which can eject the sensor if the connecting
screws are loosened under pressure.
• Make sure that the following energy sources
are switched off:
– Operating voltage
– Compressed air (drive exhausted on both
sides).
The sensor projects into the pressure
chamber of the DDPC.
Festo – DDPC – 1207NH English
Fig. 9
Fig. 10
23