Method Of Operation And Application; Transport And Storage - Festo DNCI Serie Instrucciones De Utilizacion

DNCI−...
2

Method of operation and application

When the compressed air connections are pressurized alternately, the piston rod of
the piston rod drive with integrated incremental measuring system type DNCI−...
moves in and out.
There is a magnetic tape in the piston rod. A sensor in the bearing cover converts
the magnetic pulses of the magnetic tape into electric signals depending on the
positioning path of the standard cylinder.
The DNCI−... has been designed for transporting work masses.
The integrated measuring system is intended for monitoring the position of the
piston (e.g. for electronic control in conjunction with the SPC11/SPC200 or as an
individual measuring cylinder).
The DNCI−... is not intended for use in manufacturing processes which are sensitive
to copper or PTFE.
3

Transport and storage

Take into account the weight of the
S
DNCI−... .
Depending on the design the DNCI−...
can weigh over 10 kg.
Ensure storage conditions as follows:
S
short storage periods,
cool, dry, shaded storage locations
protected from corrosion,
no influence from magnetic fields.
20
Fig. 2
Festo DNCI−... 0610a English