Complete The Installation - Kohler K-11830 Guia De Instalacion

Válvula de montaje a la pared
Ocultar thumbs Ver también para K-11830:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Orange and Black Battery Wires
Green and Red Solenoid Wires

8. Complete the Installation

NOTE: Avoid the area in front of the sensor for 2 minutes after
connections are complete. The sensor will not function correctly if it
is triggered in the first 2 minutes. Disconnect and reconnect the
power to reset the sensor.
Connect the solenoid wires (green and red).
Connect the Hybrid Energy Cell (HEC) to the power input wires
(black and orange).
Avoid the area in front of the sensor for 2 minutes.
Install the faucet trim following the directions provided.
Turn the water on.
Test the faucet.
Check for leaks.
1124216-2-B
12
Kohler Co.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

K-11831

Tabla de contenido