Description (Fig. A) - Princess 242124 Manual Del Usuario

Congratulations!
You have purchased a Princess appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.

Description (fig. A)

Your 242124 Princess coffee maker has been
designed for preparing various types of coffee,
hot water and frothed milk. The appliance is
suitable for indoor use only. The appliance is
suitable for domestic use only.
1. On/off button
2. Start/stop button
3. Water level indicator
4. Steam indicator
5. Descaling indicator
6. Cup size selector
7. Beverage selector
8. Locking collar for coffee pad cassette
9. Dispenser cassette
10. Coffee dispenser
11. Hot water dispenser
12. Milk froth dispenser
13. Coffee pad cassette
14. Ground coffee cassette
15. Cup tray
16. Drip tray
17. Water reservoir
18. Anti-chlorine filter
Initial use
Preparation
• Clean the dispenser cassette in soapy water
(fig. K).
• Clean the coffee pad cassette and the
ground coffee cassette in soapy water.
• Clean the cup tray and the drip tray in soapy
water.
• Clean the water reservoir and the lid of the
water reservoir in soapy water.
• Rinse the accessories under running water.
Deventilation (fig. A, B, C & J)
The appliance must be deventilated before
first use. Deventilation is only required for new
appliances.
Before you proceed, we need you to pay
attention to the following notes:
- Be careful with hot water and steam to
avoid burns. Hot steam can escape from
the milk froth dispenser during the process.
Before you proceed, we would like you to
focus your attention on the following notes:
- Only fill the water reservoir with fresh cold
water. Do not use carbonated water or
other liquids to fill the water reservoir.
- Do not exceed the maximum mark when
you fill the water reservoir.
• Remove the water reservoir (17) from the
appliance.
• Remove the lid (19) from the water reservoir
(17).
• Remove the cover (20) from the filter holder
(21).
• Place the anti-chlorine filter (18) in the filter
holder (21).
• Place the cover (20) on the filter holder (21).
Make sure that the arrow on the cover (20)
points in the direction as shown (fig. B).
• Place the lid (19) on the water reservoir (17).
• Fill the water reservoir (17) with water up
to the maximum mark in the filling opening
of the lid (19).
• Place the water reservoir (17) in the
appliance.
• Set the locking collar (8) to position 'B'.
• Insert the empty coffee pad cassette (13)
in the appliance.
• Set the locking collar (8) to position 'A'.
Note: If the coffee pad cassette is not inserted,
the locking collar cannot be set to position 'A'.
• Place one cup (500 ml) under the coffee
dispenser (10), the hot water dispenser (11)
and the milk froth dispenser (12).
• Fill a milk jug with cold water.
• Place the milk jug as close to the left side
of the appliance as possible.
20