Making Coffee With Ground Coffee - Princess 242124 Manual Del Usuario

• Press the on/off button (1) to switch on
the appliance. The start/stop button (2)
illuminates red. The start/stop button (2)
illuminates green when the appliance is
ready for use.
• Set the cup size selector (6) to the required
position.
• Set the beverage selector (7) to position 'B'.
• Press the start/stop button (2).
• To interrupt the process, press the start/
stop button (2) again.
• If the process is completed, set the locking
collar (8) to position 'B'.

Making coffee with ground coffee

(fig. A, C, D, E, G, H & I)
Use 5.5 - 7.5 grams of ground coffee, depending
on the quality of the coffee.
• Set the locking collar (8) to position 'C'.
• Remove the coffee pad cassette (13) from
the appliance.
• If required, insert the paper filter (22) in
the ground coffee cassette (14).
• Put the ground coffee in the ground coffee
cassette (14).
- If you want regular coffee, put ground
coffee in the ground coffee cassette.
- If you want espresso, put espresso
powder in the ground coffee cassette.
• Place the lid (23) on the ground coffee
cassette (14).
• Put the ground coffee cassette (14) in the
side marked '2' on the coffee pad cassette
(13).
• Insert the coffee pad cassette (13) into the
appliance with the ground coffee cassette
upwards.
• Set the locking collar (8) to position 'A'
as close as possible (see arrow in fig. C).
• Place the required amount of cups under
the coffee dispenser (10).
- For one cup, place the cup under both
dispenser nozzles of the coffee dispenser
(fig. I1).
- For two cups, place one cup under the
left dispenser nozzle and one cup under
the right dispenser nozzle of the coffee
dispenser (fig. I2).
• Press the on/off button (1) to switch on
the appliance. The start/stop button (2)
illuminates red. The start/stop button (2)
illuminates green when the appliance is
ready for use.
• Set the cup size selector (6) to the required
position.
• Set the beverage selector (7) to position 'B'.
• Press the start/stop button (2).
• To interrupt the process, press the start/stop
button (2) again.
• If the process is completed, set the locking
collar (8) to position 'B'.
Frothing milk (fig. A, C, D, E & J)
The milk frothing unit combines milk, steam and
air dispensing a cascade of frothy milk directly
into the cup. If you follow the instructions
under the sections "Mounting the milk frothing
unit", "Frothing milk" and "Cleaning the milk
frothing unit", the portion of milk froth in the
cup will be at least 1/3. The remaining portion
in the cup is warm milk.
Before you proceed, we need you to pay
attention to the following notes:
- Make sure that the milk jug is correctly filled.
If the milk jug becomes empty during the
milk frothing process, milk and hot steam
can escape from the milk froth dispenser.
- Only remove the milk jug and the cup when
the milk frothing process is completed. The milk
frothing process does not stop immediately.
Before you proceed, we would like you to
focus your attention on the following notes:
- Only use the milk frothing unit under the
following conditions:
- The milk frothing unit must be properly
assembled. The milk frothing unit must
be properly mounted to the appliance.
Refer to the section "Mounting the milk
frothing unit".
- A cup must be placed directly under the
milk froth dispenser.
- A suitable milk jug filled with a sufficient
amount of cold milk must be placed as
close to the left side of the appliance as
possible. The flexible tube must reach
the bottom of the milk jug.
23