Princess 242124 Manual Del Usuario página 28

Descaling (fig. A, B, C, K, L & M)
The appliance must be descaled regularly.
The appliance has an automatic descaling
indicator which informs the user when
descaling is required.
• If the descaling indicator (5) flashes, the
appliance must be descaled. It is still possible
to brew coffee and prepare hot water, but
frothing milk for cappuccino, latte macchiato
or café au lait is no longer possible.
• If the descaling indicator (5) lights continuously,
the descaling program is running.
The automatic descaling program of the appliance
is optimised to be used for 125 ml of durgol®
swiss espresso®. The product is used undiluted,
is highly effective and guarantees a reliable
descaling and therefore a long operational life of
the appliance. The descaling agent is available
from our service station.
Before you proceed, we need you to pay attention
to the following notes:
- Be careful when descaling the appliance to
prevent damage to furniture or clothing.
Place an empty pot (at least 1.8 l) under the
coffee dispenser (10), the hot water
dispenser (11) and the milk froth dispenser
(12) in such a way as to prevent splashes.
Before you proceed, we would like you to focus
your attention on the following notes:
- Only use durgol® swiss espresso® in the
specified quantity to descale the appliance.
- Do not use vinegar or vinegar concentrate
to descale the appliance.
- Do not use citric acid to descale the appliance.
Preparation
• Press the on/off button (1) to switch off the
appliance.
• Remove the dispenser cassette (9) from the
appliance.
• Remove the milk frothing unit from the
appliance.
• Manually remove the red steam nozzle (27)
from the steam outlet (30). If necessary, use
the hexagonal key (29) at the underside of
the coffee dispenser filter (28).
• Remove the water reservoir (17) from the
appliance.
• Remove the lid (19) from the water reservoir
(17).
• Remove the cover (20) from the filter holder
(21).
• Remove the anti-chlorine filter (18) from
the filter holder (21).
• Put the red steam nozzle (27) in the filter
holder (21).
• Place the cover (20) on the filter holder (21).
Make sure that the arrow on the cover (20)
points in the direction as shown (fig. B).
• Fill the empty water reservoir (17) with
125 ml of durgol® swiss espresso®.
• Place the lid (19) on the water reservoir (17).
• Fill the water reservoir (17) with water up
to the maximum mark in the filling opening
of the lid (19).
• Place the water reservoir (17) in the appliance.
Part 1 - Descaling
• Set the beverage selector (7) to position 'A'
or 'B'.
• Insert the coffee pad cassette (13) into the
appliance.
• Set the locking collar (8) to position 'A'.
• Place an empty pot (at least 1.8 l) under
the coffee dispenser (10).
• Press the on/off button (1) to switch on
the appliance.
• Keep the on/off button (1) and the start/stop
button (2) pressed at the same time until
the pump starts to run. The descaling phase
is running. The descaling indicator (5)
remains on as long as the descaling phase
is running.
• Wait for approximately 35 minutes until
the water level indicator (3) starts to flash.
Part 2 - Rinsing
• Place the lid (19) on the water reservoir (17).
• Fill the water reservoir (17) with water up
to the maximum mark in the filling opening
of the lid (19).
• Place the water reservoir (17) in the
appliance.
• Place an empty pot (at least 1.8 l) under
the coffee dispenser (10).
28