Electrical Safety - Princess 242124 Manual Del Usuario

Ocultar thumbs Ver también para 242124:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
The appliance switches off after heating.
- Do not use the appliance in locations
higher than 1,500 m above sea level.
The steam indicator flashes and the start/stop
button remains illuminated red.
- Descale the appliance. It is still possible
to brew coffee and prepare hot water,
but milk frothing is no longer possible.
The milk is not suctioned.
- Rinse the appliance.
- Wait until the start/stop button
illuminates green and attempt to froth
the milk again.
- Clean the red steam nozzle.
The milk froth does not develop.
- Make sure that the milk frothing unit is
assembled and mounted correctly.
- Manually tighten the red steam nozzle.
- Thoroughly clean the milk froth dispenser,
the flexible tube, the tube adapter and
the milk froth dispenser adapter.
The milk froth splatters extremely.
- Make sure that the milk frothing unit is
assembled and mounted correctly.
- Only use milk that comes directly from
the refrigerator.
- Allow the appliance to cool down
completely. Tightly screw the red steam
nozzle to the steam outlet.
The milk froth runs continuously.
- If you use a milk jug in which the milk
reaches higher than the milk froth dispenser
adapter, the milk jug is suctioned dry
after frothing milk: Make sure that the
milk jug is not higher than 14 cm.
The descaling program cannot be started.
- Keep the on/off button and the start/
stop button pressed at the same time.
Release the on/off button and the
start/stop button only when the pump
is operating.
- Set the beverage selector (7) to position
'A' or 'B'.
The locking collar (8) cannot be set to
another position. No coffee emerges while
the pump is operating.
- Remove the mains plug from the wall
socket and leave the appliance for
several hours to reduce the pressure.
- Refer to the section "Emergency opening
for coffee pad cassette". Caution: coffee
may spray out during the process.
Safety instructions
General safety
Read the manual carefully before use.
Keep the manual for future reference.
Only use the appliance and the accessories
for their intended purposes. Do not use the
appliance and the accessories for other
purposes than described in the manual.
Do not use the appliance if any part or any
accessory is damaged or defective. If a part
or an accessory is damaged or defective,
it must be replaced by the manufacturer or
an authorised repair agent.
Children should be supervised to ensure
that they do not play with the appliance.
The use of this appliance by children or
persons with a physical, sensory, mental or
motorial disability, or lack of experience
and knowledge can give cause to hazards.
Persons responsible for their safety should
give explicit instructions or supervise the
use of the appliance.
Do not use the appliance near bathtubs,
showers, basins or other vessels containing
water.
Do not immerse the appliance in water or
other liquids. If the appliance is immersed in
water or other liquids, do not remove the
appliance with your hands. Immediately
remove the mains plug from the wall socket.
If the appliance is immersed in water or
other liquids, do not use the appliance again.

Electrical safety

Before use, always check that the mains
voltage is the same as the voltage on the
rating plate of the appliance.
The appliance is not intended to be
operated by means of an external timer or
separate remote-control system.
Connect the appliance to an earthed wall
socket. If necessary, use an earthed
extension cable of a suitable diameter
(at least 3 x 1 mm
).
2
31

Publicidad

Tabla de contenido
loading

Tabla de contenido