OPERATING INSTRUCTIONS
The paint sprayer will not properly spray unless
the fan direction is either horizontal or vertical.
1. Adjust the direction of fan to be either horizontal
or vertical as required by loosening the air cap
ring (J) 90 degrees. Hand tighten the air cap
ring (J) after adjustment. (See Figure 1)
2. Set pattern size for desired shape. For full
pattern, open pattern control knob (F) by turning
counterclockwise. For a round pattern, turn
pattern control knob (F) clockwise.
(See Figure 2)
3. Turn the fluid control knob (G) fully clockwise
until closed. (See Figure 3)
WA R N I N G
1
Air Cap
Air Cap Ring
2
3
8
Horizontal Fan
Vertical Fan