Interface; Control Panel; Interface Description - Truper EXPERT SOMU-200X Instructivo

Control Panel

1. LCD Screen: Shows all the processes, from the
function selection to welding parameters.
2. Gas Check Button: Press the button to star the gas
supply system.
3. Wire Check Button: Press the button to start the wire
supply system.
4. Home Button: Keep the button pressed to return to
the Home Page.
5. Return Button: Press to go back to the previous step.
6. Multiple Adjust Knob: Turn to select functions and
press to confirm. Adjust in a precise manner the current
and wire feeding speed.
7. Auxiliary Knob: To adjust tension in a precise manner.

Interface Description

• The interface displayed in the LCD screen is controlled with the buttons and adjusting knobs.
The adjusting knobs, are turned to select and are pressed to confirm.
MIG Fe
Multiple Function Selection:
8 welding functions + one configuration.
m
20.0 40.0 V
min
-0.0 0.6mm -0.0
MIG Steel
t
2T
MIG
Thickness
3.0mm
Material Thickness:
Select different thicknesses with the multiple
functions knob. Press to confirm.
8 ENGLISH
Output Configuration:
Shows the output connection under different
WELDING PARAMETHERS
20.0 A 40.0 V
01
100%CO2
LIFT TIG
Ø
0.6mm
Shows all the parameters selected for the welding function selected.
More precise configurations can be set with the multiple functions knob. Press to confirm.
Interface Configuration:
Shows Language Configuration, Unit
Configuration, Light Configuration and
Information and Recovery.

Interface

2
3
+ –
welding modes.
TIG
Language
English
Español
Pусский
Polski
1
6 7
Wire Size
0.8
0.8 0.9 1.2
Electrode Selection / Wire
Diameter:
Shows electrode options / wire diameters.
20.0 A 40.0 V
1
Stick/MMA
1
VRD
SMAW
Warning!
Alarm:
Shows when the machine activates the thermal
protection because the temperature of its interior
is too high. The welder output is automatically
disconnected but the fan continues to operate.
When the internal temperature drops, the warn!
interface shuts down and the machine is ready to
operate again.
4
5
VRD OFF