Truper EXPERT SOMU-200X Instructivo página 36

clamp into the positive terminal (+).
The work piece receives higher heat, thus
produces less distortion of the piece and narrower
weld seams, makes it ideal to weld thin pieces.
Interface Home
Arco Manual
Connection of the ground clamp into the positive terminal (+)
and the torch connection into the cathode (
Connect the gas inlet of the torch (A) to the outlet valve of
the protection gas regulator.
Interface Home
TIG Lift Arc
14 ENGLISH
Weld with SMAW electrode
Connection of the
electrode into the negative
terminal (–) and the ground
Minimum and maximum parameters
of the manual arc process SMAW (110 V).
8 A 70.9 V 70 A 70.9 V
0 VRD Cierre
Arco Manual Arco Manual
0
VRD
TIG Weld
).
Minimum and maximum parameters
of the manual TIG process (110 V).
8 A 13.2 V 90 A 13.2 V
TIG lift Arc TIG lift Arc
Start Up
terminal (–) and the electrode into
the positive terminal (+). The electrode
receives higher heat producing more penetration with
basic electrode. Makes it ideal to weld thick pieces.
Minimum and maximum parameters
of the manual arc process SMAW (220 V).
8 A 63.5 V
0 VRD Cierre
Arco Manual
0
VRD
A
Minimum and maximum parameters
of the manual TIG process (220 V).
8 A 13.2 V
TIG lift Arc
Connection of the clamp
to ground into the negative
180 A 63.5 V
0 VRD Cierre 0 VRD Cierre
Arco Manual
0 0
VRD VRD
180 A 13.2 V
TIG lift Arc