Truper EXPERT SOMU-200X Instructivo página 38

Basic Types of MIG - TIG Weld Joints
1. Weld joints between thick sheets with a space between the joint to be welded and requiring more delivery of material in
the joint, we recommend to make a circular movement with the nozzle.
2. Weld joints between thin sheets in the union to be welded, we recommend making and lineal and continuous
movement with the nozzle to prevent the material coming out of shape.
3. Weld joints between over imposed sheets with orifices previously drilled.
1
Weld
applied correctly
Bevel
Angle Weld of sheets,
from thin to thick
16 ENGLISH
2
The movement is
too fast and / or the
current is too low
Spiral
Movement
Half Moon
movement
Start Up
3
Lap Fillet
Joint
The movement is
too slow and / or the
current is too high
The electrodo is
too separated from
the work piece
Zigzag
Angle Weld
Movement
of thick sheets