Playcore Swing-N-Slide PB 9242 Instrucciones De Ensamblaje página 31

LA 6347 Bighorn_- 11/29/11 9:02 AM Page 31
Fig. 23
ONE SIDE ONLY
[PF 4013]
5/4'' x 4'' x 47-1/2''
[PF 4013]
5/4'' x 4'' x 47-1/2''
ONE SIDE ONLY
1-1/4'' Lag Screw
Monkeybar Assembly:
1. Laminate Monkey Bar Ladder Uprights as shown in (Fig. 23).
2. Measure and place Monkey Bar Step Brackets and Boomerang Bracket on upright as shown in (Fig. 23a).
Pre-Drill Note: To prevent wood from splitting, pre-drill the (3) holes for the 1-1/4'' Lag Screws. Use a 1/8'' drill
bit & drill to a maximum depth of 1-1/4''.
3. Reverse dimensions for the brackets on the opposite leg and repeat step 2.
x 2
[PF 4011]
5/4'' x 4'' x 23-3/4''
(20)
1-1/2''
screws
per upright
[PF 4013]
5/4'' x 4'' x 47-1/2''
[PF 4011]
5/4'' x 4'' x 23-3/4''
Pre-Drill
DETAIL OF
STEP BRACKET
Measure From
Arrows
48-1/4''
37''
25-7/8''
1-1/2'' screw
31
Assembly Plan
Fig. 23a
10-1/4''
FLUSH
(3)
1-1/4''
Lag screws
per bracket
(3)
1-1/4''
screws
per bracket
46-1/8''
35''
23-3/4''
1-1/4'' Wood Screw