IMPORTANT: In case the brake position of use needs to be changed (from normal
position to position for small hands and viceversa), it is recommended to reposition the
pads at the correct distance from the rim (1 mm pad – rim) by using the brake cable
tension regulator.
5.1 - LEFT HAND CONTROL SET
• The outer lever (B - Fig. 1) and the inner lever (C – Fig. 1) on the left-hand controls
operate the front derailleur.
CHAINRING CHANGE WITH ACTIVATION AT THE LEVERS' END OF TRAVEL
• With the chain positioned on the lower
chainring, if we activate the outer lever
at the end of the travel (Fig. 5), the chain
climbs on the larger chainring with 1, 2
or 3 clicks, depending on where the front
derailleur forks is positioned before the
activation.
5
ENGLISH
35