Before Using Your Bicycle - CAMPAGNOLO ERGOPOWER SUPER RECORD Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 84
DO NOT RIDE YOUR BICYCLE IF IT DOES NOT PASS THIS PRE-RIDE TEST
CORRECT ANY CONDITION BEFORE YOUR RIDE.
• Be sure that all of the components of your bicycle, including but not limited to
your brakes, pedals, handgrips, handlebars, frame and seating system, are in opti-
mum condition and suitable for use.
• Be sure that none of the components of bicycle are bent, damaged or out of
alignment.
• Check to be sure that all quick release fasteners, nuts and bolts are properly
adjusted. Bounce the bicycle on the ground and listen and look for anything which
may be loose.
• Be sure that your wheels are perfectly centred. Spin the wheels to be sure
that they do not wobble up and down or from side to side, and that they do not
make contact with the fork legs or brake pads while rotating.
• Check all reflectors to make sure that they are clean, straight and securely
mounted.
• Check you brake pads and cables to be sure they are in good condition.
• Test your brakes in the beginning of your ride to make sure that they are operating
properly.
• Learn and follow the local bicycle laws and regulations, and obey all traffic
signals, signs and laws while you ride.
If you ever any comments, questions or concerns, please contact your nearest
Campagnolo Service Center. A list of service centers may be found on our web-
site at www.campagnolo.com.
ENGLISH

4 - BEFORE USING YOUR BICYCLE

31

Publicidad

Tabla de contenido
loading

Tabla de contenido