KTM Power Parts 62011042044 Manual Del Usuario página 5

1
2
3,2mm
B
Scope of delivery:
1x power socket
1x cable, SMT power socket
1x hexagon nut M18x1 SW22
Preparations
- Remove the trim (1).
990 SMT
- Drill a ø18.5mm hole for the power socket.
NOTE
A marking (2) on the back of the trim indicates the correct position.
990 SMT
- Cut out a small notch in addition to the hole (figure A).
A
690 Duke
- Drill a ø18.5mm hole for the power socket.
690 Duke
- Cut out a small notch in addition to the hole (figure B).
60111042000
62011042060
62011042050
5