Output Settings _ Cal 3 - Baxtran IKP Serie Manual De Usuario

User's Guide
5. Setup calibration weight
DISPLAY
XXXXXX
XXXXXXX
b.Pnt.CAL
1. Put the calibration weight on the weighing pan.
2. Use the numeric keys to input the calibration weight in gram.
3. When the AD value becomes stable, press

OUTPUT SETTINGS _ CAL 3

This section is applicable only for models with RS232 module.
Press to toggle among the options, and press
1. Baut rate
DISPLAY
19200
2. Parity setting
DISPLAY
PAritY
PAritY
PAritY
PAritY
3. Printout setting
DISPLAY
StAbLE.1
StAbLE.2
40
DESCRIPTION
The first row AD value, the second row is the calibration weight (Unit: gram), and the third
row shows "b.Pnt.CAL".
The default calibration weight is 1000 g. Us the numeric keys to change the desired cali-
bration weight.
DESCRIPTIONS
bAud
Set the baud rate to 2400
2400
bAud
Set the baud rate to 4800
4800
bAud
Set the baud rate to 9600
9600
bAud
Set the baud rate to 19200
DESCRIPTIONS
Set the parity to 7-E-1
7-E-1
Set the parity to 7-o-1
7-o-1
Set the parity to 7-n-2
7-n-2
Set the parity to 8-n-1
8-n-1
DESCRIPTIONS
Print
Press to print single weighing result. Press
PrESS
weight and total accumulation.
Print weighing result (Net wt, Pc. wt, Pc. count) when the scale is stable and weight >0.
Print
Pressing do not print.
Print Net wt when the scale is stable and weight >0.
Print
Pressing do not print.
Press to print single weighing result.
Print
ALL.1
Press in
Print weighing result (Net wt, Pc. wt, Pc. count) when the scale is stable and weight >0.
to complete the calibration.
to confirm.
mode to print accumulated weighing result and total accumulation.
IKP model
in mode print accumulated