Sampling Operation; Setup Piece Weight By Direct Keypad Input; Setup Piece Weight By Sampling _ Method 1 - Baxtran IKP Serie Manual De Usuario

IKP model
KEYPAD
~

SETUP PIECE WEIGHT BY DIRECT KEYPAD INPUT

1. In weighing mode, press the numeric and decimal keys to input the piece weight. (Piece weight unit
is in grams)
2. Then, press
3. The input data will be cleared in 4 seconds if

SETUP PIECE WEIGHT BY SAMPLING _ METHOD 1

1. Put certain pieces of objects on to the scale pan.
2. In weighing mode, press the numeric and decimal keys to enter the piece count.
Press to switch the scale OFF
Press to turn the scale ON
Press to absorb trivial weight on the pan and set the scale to zero
Press to perform tare operation
Press the numeric and decimal keys to input data such as piece weight, PLU no, etc
Press to clear the input data
Press to set alarm for high and low bounds for piece count and weight
Press to add piece count and weight
Press to recall total piece count and total weight
Press to store, load, or modify preset piece weight
Press to set up piece weight
Press to set up sample quantity
Press to switch operation between A scale (main scale) and B scale (external load cell)
Display Gross Weight, Net Weight, and Tare Weight
Press to load preset piece weight from direct PLU keys
, and the piece weight has been changed.

3. SAMPLING OPERATION

is not pressed.
User's Guide
33