Settings And Calibration; General Settings _ Cal 1 - Baxtran IKP Serie Manual De Usuario

IKP model
1. Press and hold any key. CAL 1 is shown on the LCD display.
2. Press key to toggle among the CAL 1, CAL 2, CAL 3, CAL 4 and CAL 5 menus.
3. Select CAL 1, press
4. Select CAL 2, press
5. Select CAL 3, press
6. Select CAL 4, press
7. Select CAL 5, press
Note: To perform CAL 4 and CAL 5 calibration, you must remove the JP3 jumper from the PCB first. Put the
JP3 back after calibration is complete.

GENERAL SETTINGS _ CAL 1

In the General Settings menu, press
1. Aut.oFF - Auto OFF settings
DISPLAY
Auto.oFF
oFF
Auto.oFF
5
Auto.oFF
10
Auto.oFF
20
Auto.oFF
30
2. B.LiGHt - Backlight setting
DISPLAY
b.LiGHt
oFF
b.LiGHt
on
b.LiGHt
AUto
3. rE.tArE - Repeat tare setting
DISPLAY
rE.tArE
oFF
rE.tArE
on
to enter General Settings menu.
to enter the External Load Cell (B scale) Settings menu.
to enter Output Settings menu.
to enter Calibration procedure.
to enter Linearity Calibration procedure.
to toggle among the options, and
DESCRIPTIONS
Disable auto shutdown function.
If there is no operation, the scale will shut down in 5 minutes.
If there is no operation, the scale will shut down in 10 minutes.
If there is no operation, the scale will shut down in 20 minutes.
If there is no operation, the scale will shut down in 30 minutes.
DESCRIPTIONS
Disable the backlight function.
Enable the backlight function.
Automatic backlight when there is load on the weighing pan.
DESCRIPTIONS
Disable repeat Tare operation.
Enable repeat Tare operation.

6. SETTINGS AND CALIBRATION

User's Guide
to confirm.
37