Motorised Version 7.4.3 B-1000Ti-2 / 3 - Optika Italy B-1000 Serie Manual De Instrucciones

7.4.2 Motorised version
1. Assemble the stage in the same way as the ma-
nual version. Check the perfect alignment of the
rear part of the stage with the rear arm of the fra-
me. An imperfect alignment could lead to an in-
correct functioning of the system. (Fig. 9)
2. Connect the cable ① from the stage to the frame
and tight the locking screws of the connectors ②.
(Fig. 10)
3. Connect the provided cables: ③ 12V power sup-
ply for the motorised parts; ④ 6V microscope po-
wer supply; ⑤ serial cable; ⑥ PS/2 mouse. Con-
nect power cables as the last step. (Fig. 11)
Page 14
②
①
③ ④ ⑤ ⑥
Fig. 9
Fig. 10
Fig. 11