Optika Italy B-1000 Serie Manual De Instrucciones página 32

4. Turn the polarizer knob Ⓗ under the condenser
to achieve maximum darkening of the eyepieces,
and then tighten the polarizer locking screw Ⓖ.
(Fig. 63)
5. Once the maximum darkening is achieved, re-
move the slider from the nosepiece, remove the
analyzer from the dummy slider and insert it into
the DIC prism. Now insert the DIC slider ⑥ into
the slot ⑤. (Fig. 64)
6. Rotate the condenser turret ⑦ to insert the DIC
prism matching the objective in use. (Fig. 65)
• The condenser is supplied with magnetic
markers. Each marker is specific to the type
of insert mounted in the condenser (DIC, PH,
DF, etc.).
7. Put a specimen on the stage and focus.
8. Begin the observation by turning the knob on the
DIC slider ⑧ to obtain a three-dimensional effect
of the sample. (Fig. 66)
Ⓖ
⑦
Page 32
Ⓗ
⑥
⑤
⑧
Fig. 63
Fig. 64
Fig. 65
Fig. 66