Look RSP SEATPOST Manual De Instrucciones página 11

GB
1 - Position the TAPERED FLANGES (3 and 5)
on the SADDLE STEM'S cones (6).
2 - Select the retraction needed (+ or – 5
mm) so as to put the saddle in the desired
position.
3 - Bring the SADDLE RAILS in the TAPERED
FLANGES' grooves.
4 - Insert SCREW M5 x 55 (1) in the OUTER
FLANGE (2).
5 - Insert these elements in the STEM +
TAPERED FLANGES unit and insert it in
the THREADED OUTER FLANGE (4).
6 - Slightly tighten the whole with a 5 mm hex
key.
10
FITTINg ThE SADDLE TO ThE RSP R5 STEM
1
2
3
7
8
1 : M5 x 55 screw
2 : Outer flange
9
3 : Tapered flange
4 : Threaded outer flange
5 : Tapered flange
6 : Saddle stem
12
Fig 2
4
5
6
10
11