Chicago Faucets HyTronic 116.121.21.1 Instrucciones De Servicio página 6

Connect braided hose with filter to supply valve
Cold water > white label
8
Hot water > no label
For AC faucets, please refer to the plugin or hardwired
transformer installation instructions.
Connect to power supply
9
Result
The faucet is now mounted.
Mounting of Wall Mount Faucet
Prerequisites
• Supply valve is installed
• Water supply lines are flushed properly
• For AC faucets, power outlet is installed
It is not necessary to unscrew the connection between
braided hose and housing to install the product.
Do not remove protective covering from sensor until
starting up faucet operation.
Mount gasket, put faucet into opening and tighten
1
Chicago Faucets HyTronic User Guide
Install aerator and tighten with aerator key (supplied)
2
For Gooseneck faucets, tighten spout with wrench.
3
Connect braided hose with filter to supply valve
Cold water > white label
4
Hot water > no label
For AC faucets, please refer to the plugin or hardwired
transformer installation instructions.
Connect to power supply
5
Result
The Wall Mount faucet is now mounted.
6